Tehama County · Zoning · M-2
Tehama County M-2 zoning: height, setbacks and lot size
In Tehama County's M-2 zone, the front setback is 50 ft from the roadway centerline or 20 ft from the property line, whichever is greater, the side setback limit is None required and the rear setback limit is None required (Tehama County code, read October 2026).
Key points
- Minimum front setback: 50 ft from the roadway centerline or 20 ft from the property line, whichever is greater
- Minimum side setback: None required (except as the building code or other regulations require)
- Minimum rear setback: None required
- Maximum lot coverage: No limit
M-2 (GENERAL INDUSTRIAL DISTRICT) is a zoning district in Tehama County. Every value below was read from the Tehama County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in M-2
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 50 ft from the roadway centerline or 20 ft from the property line, whichever is greater § 17.36.040 · code textA. Front yard, fifty feet from the centerline of roadway or twenty feet from the property line, whichever is greater; |
|---|---|
| Minimum side setback | None required Applies: except as the building code or other regulations require § 17.36.040 · code textB. Side yards, none, except as required by the building code or other regulations; |
| Minimum rear setback | None required § 17.36.040 · code textC. Rear yard, none. |
| Maximum lot coverage | No limit § 17.36.070 · code textA. Lot coverage, none; |
Not on this page
We did not find a general height, stories, lot size, FAR, density limit for M-2 in the zoning tables we read. The code may still set one elsewhere — check the Tehama County Municipal Code.
Other Tehama County zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in Tehama County's M-2 zone?
50 ft from the roadway centerline or 20 ft from the property line, whichever is greater — Tehama County Municipal Code § 17.36.040.
What is the minimum side setback in Tehama County's M-2 zone?
None required (except as the building code or other regulations require) — Tehama County Municipal Code § 17.36.040.
What is the minimum rear setback in Tehama County's M-2 zone?
None required — Tehama County Municipal Code § 17.36.040.
What is the maximum lot coverage in Tehama County's M-2 zone?
No limit — Tehama County Municipal Code § 17.36.070.
General information, not legal advice.
Ask about a Tehama County property in M-2
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question