Skip to content

Vallejo · Zoning · WMX

Vallejo WMX zoning: height, setbacks and lot size

In Vallejo's WMX zone, the front setback is 0 ft, the side setback limit is 0 ft and the FAR limit is 3.0 (Vallejo code, read October 2026).

Key points

  • Minimum front setback: 0 ft
  • Minimum side setback: 0 ft (where abutting R District)
  • Maximum floor area ratio (FAR): 3.0 (Non-residential floor area; where the General Plan is Central Corridor)
  • Maximum density: 16 to 50 units per net acre (the code sets a range: at least 16, at most 50; if General Plan is Central Corridor)

WMX (Waterfront Mixed Use) is a zoning district in Vallejo. Every value below was read from the Vallejo Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in WMX

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Minimum front setback
0 ft
§ 16.203.02 · code text
Table row “Street Frontage”, column “WMX”: 0 Setback
Minimum side setback
0 ft
Applies: where abutting R District
§ 16.203.02 · code text
Table row “Interior Side”, column “WMX”: 0 Setback, where abutting R District
Maximum floor area ratio (FAR)
3.0
Applies: Non-residential floor area; where the General Plan is Central Corridor
§ 16.203.02 · code text
Table row “Maximum Non-Residential Floor Area Ratio (FAR)”, column “WMX”: 3.0 (if General Plan is Central Corridor) - 6.0 (if General Plan is District-Downtown/Waterfront)
Maximum density
16 to 50 units per net acre
Applies: the code sets a range: at least 16, at most 50; if General Plan is Central Corridor
§ 16.203.02 · code text
Table row “Minimum/Maximum Density (units/net acre)”, column “WMX”: 30/90 (if General Plan is District-Downtown/Waterfront) - 16/50 (if General Plan is Central Corridor)

When a different number applies

The code sets other values for particular lots, buildings or locations in WMX:

  • Minimum rear setback: 5 ft — where abutting R District § 16.203.02
  • Maximum floor area ratio (FAR): 6.0 — Non-residential floor area; where the General Plan is District-Downtown/Waterfront § 16.203.02

Not on this page

We did not find a general height, stories, rear setback, lot size, lot coverage limit for WMX in the zoning tables we read. The code may still set one elsewhere — check the Vallejo Municipal Code.

Other Vallejo zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the minimum front setback in Vallejo's WMX zone?

0 ft — Vallejo Municipal Code § 16.203.02.

What is the minimum side setback in Vallejo's WMX zone?

0 ft (where abutting R District) — Vallejo Municipal Code § 16.203.02.

What is the maximum floor area ratio (far) in Vallejo's WMX zone?

3.0 (non-residential floor area; where the General Plan is Central Corridor) — Vallejo Municipal Code § 16.203.02.

What is the maximum density in Vallejo's WMX zone?

16 to 50 units per net acre (the code sets a range: at least 16, at most 50; if General Plan is Central Corridor) — Vallejo Municipal Code § 16.203.02.

General information, not legal advice.

Ask about a Vallejo property in WMX

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Vallejo