Los Angeles Building Code — LAMC Chapter IX § 93.0402 Electrical Equipment
Los Angeles Building Code — LAMC Chapter IX · 2026-08 edition · updated 2026-09-23 · Los Angeles
Cite as: Los Angeles Building Code — LAMC Chapter IX § 93.0402 · Text as of 2026-09-23
(Title and Section Amended by Ord. No. 185,198, Eff. 11/22/17.)
Electrical equipment as defined in CEC Article 100 shall either be approved by the Department or be listed or certified by a Department approved Electrical Testing Agency.
Listed or certified electrical equipment shall bear the label, symbol or other identifying mark of the approved testing agency. The equipment shall be installed, used and maintained in conformance with its listing or certification and the Los Angeles Electrical Code.
SEC. 93.0403. USED EQUIPMENT.
(Added by Ord. No. 154,234, Eff. 9/8/80.)
(a) Any used or secondhand material, including any fitting, device, appliance, apparatus, or other equipment reinstalled for electric wiring shall comply with the following provisions:
All such equipment shall be in good, satisfactory and durable condition, and adequate and satisfactory for the purpose intended or used, all of the foregoing to be determined by the Department. Such equipment must also comply with all requirements of Division 4 of Article 3, Chapter IX of the LAMC regarding approval. (Amended by Ord. No. 185,587, Eff. 7/16/18.)
No used or secondhand insulated conductors shall be used for services or for circuits operating at more than 250 volts.
| 3. No used, reconditioned, or refurbished molded or electronic trip molded case circuit breakers.(Added by Ord. No. 182,851, Eff. 1/3/14.) |
|---|
- (b) Nothing contained in this section shall be construed to waive any other specific requirements of the Code, including requirements for nameplates, enclosure of live parts, horsepower rating of switches, or protection from corrosion.
Get a plain-English answer with a citation back to this text.
Ask AI about this code