Skip to content

Indio · Zoning · NC

Indio NC zoning: height, setbacks and lot size

In Indio's NC zone, buildings can be up to 40 ft (3 stories) tall and the front setback is 10 ft (Indio code, read October 2026).

Key points

  • Maximum building height: 40 ft
  • Maximum number of stories: 3 stories
  • Minimum front setback: 10 ft
  • Minimum side setback: 0 ft (building site setback; individual lots with detached single-family homes need 5 ft)
  • Minimum rear setback: 15 ft
  • Maximum floor area ratio (FAR): 0.5 (Non-residential)
  • Maximum density: 20 units/acre

NC is a zoning district in Indio. Every value below was read from the Indio Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in NC

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
40 ft
§ 2.03.03 · code text
Table row “Maximum Height (ft)/Stories (ft)”, column “NC”: 40/3 stories
Maximum number of stories
3 stories
§ 2.03.03 · code text
Table row “Maximum Height (ft)/Stories (ft)”, column “NC”: 40/3 stories
Minimum front setback
10 ft
§ 2.03.03 · code text
Table row “Front — Minimum”, column “NC”: 10
Minimum side setback
0 ft
Applies: building site setback; individual lots with detached single-family homes need 5 ft
§ 2.03.03 · code text
Table row “Interior Side — Minimum”, column “NC”: 0; 10 ft abutting residential zones
Minimum rear setback
15 ft
§ 2.03.03 · code text
Table row “Rear — Minimum”, column “NC”: 15; 20 ft abutting residential zones
Maximum floor area ratio (FAR)
0.5
Applies: Non-residential
§ 2.03.03 · code text
Table row “Non-Residential Maximum Floor Area Ratio”, column “NC”: 0.5
Maximum density
20 units/acre
§ 2.03.03 · code text
Table row “Maximum”, column “NC”: 20.0

Uses in NC

Uses the code's use tables allow in NC, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in NC:

  • Maximum building height: 45 ft — With architectural features § 2.03.03
  • Minimum side setback: 10 ft — Abutting residential zones § 2.03.03
  • Minimum rear setback: 20 ft — Abutting residential zones § 2.03.03
  • Minimum lot size: 10,000 sq ft — Minimum development project site for new lots § 2.03.03

Not on this page

We did not find a general lot size, lot coverage limit for NC in the zoning tables we read. The code may still set one elsewhere — check the Indio Municipal Code.

Other Indio zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Indio's NC zone?

40 ft — Indio Municipal Code § 2.03.03.

What is the maximum number of stories in Indio's NC zone?

3 stories — Indio Municipal Code § 2.03.03.

What is the minimum front setback in Indio's NC zone?

10 ft — Indio Municipal Code § 2.03.03.

What is the minimum side setback in Indio's NC zone?

0 ft (building site setback; individual lots with detached single-family homes need 5 ft) — Indio Municipal Code § 2.03.03.

What is the minimum rear setback in Indio's NC zone?

15 ft — Indio Municipal Code § 2.03.03.

General information, not legal advice.

Ask about an Indio property in NC

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Indio