Skip to content

Porterville · Zoning · DRM-3

Porterville DRM-3 zoning: height, setbacks and lot size

In Porterville's DRM-3 zone, buildings can be up to 40 ft tall, the front setback is 15 ft and the minimum lot size is 6,000 sq ft (Porterville code, read October 2026).

Key points

  • Maximum building height: 40 ft
  • Minimum front setback: 15 ft
  • Minimum side setback: 5 ft (1–2 stories)
  • Minimum rear setback: 10 ft
  • Minimum lot size: 6,000 sq ft
  • Maximum density: 33.0 dwelling units/net acre

DRM-3 is a zoning district in Porterville. Every value below was read from the Porterville Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in DRM-3

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
40 ft
§ 202.03 · code text
Table row “Maximum height (ft.)”, column “DRM-3”: 40; 50 on corner lots
Minimum front setback
15 ft
§ 202.03 · code text
Table row “Front (Main St. frontage is always considered the front of the lot)”, column “DRM-3”: 15
Minimum side setback
5 ft
Applies: 1–2 stories
§ 202.03 · code text
Table row “Interior side”, column “DRM-3”: 1 - 2 stories: 5 3 or more stories: 10
Minimum rear setback
10 ft
§ 202.03 · code text
Table row “Rear, not on a street frontage”, column “DRM-3”: 10
Minimum lot size
6,000 sq ft
§ 202.03 · code text
Table row “Minimum lot area (sq. ft.)”, column “DRM-3”: 6,000
Maximum density
33.0 dwelling units/net acre
§ 202.03 · code text
Table row “Maximum density (dwelling units/net acre)”, column “DRM-3”: 33.0

Uses in DRM-3

Uses the code's use tables allow in DRM-3, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in DRM-3:

  • Maximum building height: 50 ft — corner lots § 202.03
  • Minimum side setback: 10 ft — 3 or more stories § 202.03

Not on this page

We did not find a general stories, lot coverage, FAR limit for DRM-3 in the zoning tables we read. The code may still set one elsewhere — check the Porterville Municipal Code.

Other Porterville zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Porterville's DRM-3 zone?

40 ft — Porterville Municipal Code § 202.03.

What is the minimum front setback in Porterville's DRM-3 zone?

15 ft — Porterville Municipal Code § 202.03.

What is the minimum side setback in Porterville's DRM-3 zone?

5 ft (1–2 stories) — Porterville Municipal Code § 202.03.

What is the minimum rear setback in Porterville's DRM-3 zone?

10 ft — Porterville Municipal Code § 202.03.

What is the minimum lot size in Porterville's DRM-3 zone?

6,000 sq ft — Porterville Municipal Code § 202.03.

General information, not legal advice.

Ask about a Porterville property in DRM-3

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Porterville