Redlands I-P zoning: height, setbacks and lot size

I-P (Industrial District) is a zoning district in Redlands. Every value below was read from the Redlands Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in I-P

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Minimum front setback	25 ft Applies: 50 ft when adjacent to a major or secondary highway, or adjacent to or across the street from a residential zone, school or park § 18.112.110 · code text Each lot shall have a front yard of not less than twenty five feet (25'), extending across the full width of the lot, except where adjacent to a major or secondary highway, and except where adjacent to or across the street from a residential zone, school or park, in which case the front yard shall be not less than fifty feet (50').
Minimum side setback	None required Applies: Unless the lot adjoins a residential district. § 18.112.110 · code text None required, except where adjoining a residential district, the side yard shall be twenty five feet (25') and the rear yard shall be a minimum of fifty feet (50').
Minimum rear setback	None required Applies: Unless the lot adjoins a residential district. § 18.112.110 · code text None required, except where adjoining a residential district, the side yard shall be twenty five feet (25') and the rear yard shall be a minimum of fifty feet (50').
Minimum lot size	20,000 sq ft § 18.112.080 · code text Each lot in the I-P zone shall have a minimum area of twenty thousand (20,000) square feet.
Maximum lot coverage	50% § 18.112.140 · code text Lot area coverage by buildings and structures in the I-P zone shall not exceed fifty percent (50%) of the total lot area.

When a different number applies

The code sets other values for particular lots, buildings or locations in I-P:

Minimum front setback: 50 ft — Adjacent to a major or secondary highway, or adjacent to or across the street from a residential zone, school or park. § 18.112.110
Minimum side setback: 25 ft — Where adjoining a residential district § 18.112.110
Minimum rear setback: 50 ft — Where adjoining a residential district § 18.112.110

Not on this page

We did not find a general height, stories, FAR, density limit for I-P in the zoning tables we read. The code may still set one elsewhere — check the Redlands Municipal Code.

Other Redlands zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the minimum front setback in Redlands's I-P zone?

25 ft (50 ft when adjacent to a major or secondary highway, or adjacent to or across the street from a residential zone, school or park) — Redlands Municipal Code § 18.112.110.

What is the minimum side setback in Redlands's I-P zone?

None required (unless the lot adjoins a residential district) — Redlands Municipal Code § 18.112.110.

What is the minimum rear setback in Redlands's I-P zone?

None required (unless the lot adjoins a residential district) — Redlands Municipal Code § 18.112.110.

What is the minimum lot size in Redlands's I-P zone?

20,000 sq ft — Redlands Municipal Code § 18.112.080.

What is the maximum lot coverage in Redlands's I-P zone?

50% — Redlands Municipal Code § 18.112.140.

General information, not legal advice.