Redlands M-P zoning: height, setbacks and lot size

M-P (Planned Industrial District) is a zoning district in Redlands. Every value below was read from the Redlands Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in M-P

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height	50 ft § 18.104.100 · code text Buildings and structures in the M-P zone shall have a height not greater than fifty feet (50').
Minimum front setback	25 ft Applies: Yard abutting a street that is not a boundary with a residential zone. § 18.104.110 · code text Where the M-P zone fronts, sides or rears on a street which is a boundary with a residential zone, there shall be a yard abutting such street of not less than fifty feet (50'). The twenty five feet (25') nearest the street shall be landscaped and maintained. The remainder may be used for parking.
Minimum side setback	50 ft Applies: Where the M-P zone sides directly on property in a residential zone § 18.104.110 · code text Where the M-P zone sides or rears directly on property in a residential zone, there shall be a yard of not less than fifty feet (50'). Such yard may be used for parking. A solid masonry wall six feet (6') in height shall be installed along the property line abutting the residential zone.
Minimum rear setback	50 ft Applies: Where the M-P zone rears directly on property in a residential zone § 18.104.110 · code text Where the M-P zone sides or rears directly on property in a residential zone, there shall be a yard of not less than fifty feet (50'). Such yard may be used for parking. A solid masonry wall six feet (6') in height shall be installed along the property line abutting the residential zone.
Minimum lot size	20,000 sq ft § 18.104.080 · code text Each lot in the M-P zone shall have a minimum area of twenty thousand (20,000) square feet.
Maximum lot coverage	50% § 18.104.140 · code text Lot area coverage by buildings and structures in the M-P zone shall not exceed fifty percent (50%) of the total lot area.

When a different number applies

The code sets other values for particular lots, buildings or locations in M-P:

Minimum front setback: 50 ft — Yard abutting a street that is a boundary with a residential zone. § 18.104.110
Minimum side setback: 25 ft — Where the M-P zone sides on a street which is not a boundary with a residential zone § 18.104.110
Minimum rear setback: 25 ft — Where the M-P zone rears on a street which is not a boundary with a residential zone § 18.104.110

Not on this page

We did not find a general stories, FAR, density limit for M-P in the zoning tables we read. The code may still set one elsewhere — check the Redlands Municipal Code.

Other Redlands zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Redlands's M-P zone?

50 ft — Redlands Municipal Code § 18.104.100.

What is the minimum front setback in Redlands's M-P zone?

25 ft (yard abutting a street that is not a boundary with a residential zone) — Redlands Municipal Code § 18.104.110.

What is the minimum side setback in Redlands's M-P zone?

50 ft (where the M-P zone sides directly on property in a residential zone) — Redlands Municipal Code § 18.104.110.

What is the minimum rear setback in Redlands's M-P zone?

50 ft (where the M-P zone rears directly on property in a residential zone) — Redlands Municipal Code § 18.104.110.

What is the minimum lot size in Redlands's M-P zone?

20,000 sq ft — Redlands Municipal Code § 18.104.080.

General information, not legal advice.