Redlands · Zoning · T
Redlands T zoning: height, setbacks and lot size
In Redlands's T zone, generally the front setback is 10 ft and the minimum lot size is 5,000 sq ft, with the conditions listed below (Redlands code, read October 2026).
Key points
- Minimum front setback: 10 ft (a lot that abuts a residential zone must meet that zone front setback instead)
- Minimum side setback: None required (next to an interior property line)
- Minimum rear setback: None required (wheel stops and/or solid masonry walls must protect the adjacent property)
- Minimum lot size: 5,000 sq ft
- Maximum density: None permitted
T (Transitional District) is a zoning district in Redlands. Every value below was read from the Redlands Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in T
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 10 ft Applies: a lot that abuts a residential zone must meet that zone front setback instead § 18.72.090 · code textIn the T district, each lot shall have a front yard extending for the full width of the lot. The yard shall be not less than ten feet (10') in depth, except that any T lot which immediately abuts a residential zone shall have a front setback of not less than that required for the residential zone. |
|---|---|
| Minimum side setback | None required Applies: next to an interior property line § 18.72.100 · code textIn the T district, a side yard adjacent to any street shall be not less than ten feet (10'). No side yard setback is required adjacent to any interior property line; however, protection for the adjacent property in the form of wheel stops and/or solid masonry walls shall be provided. |
| Minimum rear setback | None required Applies: wheel stops and/or solid masonry walls must protect the adjacent property § 18.72.110 · code textNo rear yard setback is required in the T district; however, protection for the adjacent property in the form of wheel stops and/or solid masonry walls shall be provided. |
| Minimum lot size | 5,000 sq ft § 18.72.050 · code textEach lot in the T district shall have a minimum area of five thousand (5,000) square feet. |
| Maximum density | None permitted § 18.72.070 · code textPopulation density in the T district: None permitted. |
When a different number applies
The code sets other values for particular lots, buildings or locations in T:
- Minimum side setback: 10 ft — side yard adjacent to any street § 18.72.100
Not on this page
We did not find a general height, stories, lot coverage, FAR limit for T in the zoning tables we read. The code may still set one elsewhere — check the Redlands Municipal Code.
Other Redlands zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in Redlands's T zone?
10 ft (a lot that abuts a residential zone must meet that zone front setback instead) — Redlands Municipal Code § 18.72.090.
What is the minimum side setback in Redlands's T zone?
None required (next to an interior property line) — Redlands Municipal Code § 18.72.100.
What is the minimum rear setback in Redlands's T zone?
None required (wheel stops and/or solid masonry walls must protect the adjacent property) — Redlands Municipal Code § 18.72.110.
What is the minimum lot size in Redlands's T zone?
5,000 sq ft — Redlands Municipal Code § 18.72.050.
What is the maximum density in Redlands's T zone?
None permitted — Redlands Municipal Code § 18.72.070.
General information, not legal advice.
Ask about a Redlands property in T
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question