Upland · Zoning · GI
Upland GI zoning: height, setbacks and lot size
In Upland's GI zone, generally buildings can be up to 40 ft tall, the front setback is 0 ft and the minimum lot size is 1 acre, with the conditions listed below (Upland code, read October 2026).
Key points
- Maximum building height: 40 ft
- Minimum front setback: 0 ft
- Minimum side setback: 0 ft
- Minimum rear setback: 0 ft
- Minimum lot size: 1 acre (Applies only to the creation of new parcels through the subdivision process.)
- Maximum floor area ratio (FAR): 0.5
GI is a zoning district in Upland. Every value below was read from the Upland Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in GI
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 40 ft § 17.07.030 · code textTable row “Structure Height (max.)”, column “GI”: 40 ft. |
|---|---|
| Minimum front setback | 0 ft § 17.07.030 · code textTable row “Front”, column “GI”: 0 ft. |
| Minimum side setback | 0 ft § 17.07.030 · code textTable row “Side”, column “GI”: 0 ft. |
| Minimum rear setback | 0 ft § 17.07.030 · code textTable row “Rear”, column “GI”: 0 ft. |
| Minimum lot size | 1 acre Applies: Applies only to the creation of new parcels through the subdivision process. § 17.07.030 · code textTable row “GI”, column “Parcel Area (min.)[1]”: 1 acre |
| Maximum floor area ratio (FAR) | 0.5 § 17.07.030 · code textTable row “GI”, column “Floor Area Ratio (max.)[2]”: 0.5 |
Uses in GI
Uses the code's use tables allow in GI, or allow with a permit. Each links to its page with the code section.
- Church or place of worship — Needs an administrative use permit
- Kennel — Needs an administrative use permit
Not on this page
We did not find a general stories, lot coverage, density limit for GI in the zoning tables we read. The code may still set one elsewhere — check the Upland Municipal Code.
Other Upland zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Upland's GI zone?
40 ft — Upland Municipal Code § 17.07.030.
What is the minimum front setback in Upland's GI zone?
0 ft — Upland Municipal Code § 17.07.030.
What is the minimum side setback in Upland's GI zone?
0 ft — Upland Municipal Code § 17.07.030.
What is the minimum rear setback in Upland's GI zone?
0 ft — Upland Municipal Code § 17.07.030.
What is the minimum lot size in Upland's GI zone?
1 acre (applies only to the creation of new parcels through the subdivision process) — Upland Municipal Code § 17.07.030.
General information, not legal advice.
Ask about an Upland property in GI
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question