Skip to content

Upland · Zoning · RM-30

Upland RM-30 zoning: height, setbacks and lot size

In Upland's RM-30 zone, generally buildings can be up to 40 ft tall and the front setback is 20 ft, with the conditions listed below (Upland code, read October 2026).

Key points

  • Maximum building height: 40 ft (greater height only with a conditional use permit)
  • Minimum front setback: 20 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 15 ft
  • Maximum density: 30 units per net acre (a project over 15 units per acre needs a conditional use permit; density bonuses not counted)

RM-30 is a zoning district in Upland. Every value below was read from the Upland Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RM-30

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
40 ft
Applies: greater height only with a conditional use permit
§ 17.04.030 · code text
Table row “Primary Structure Height (max.)”, column “RM-30”: 40 ft.[5]
Minimum front setback
20 ft
§ 17.04.030 · code text
Table row “Front”, column “RM-30”: 20 ft.
Minimum side setback
5 ft
§ 17.04.030 · code text
Table row “Side”, column “RM-30”: 5 ft.
Minimum rear setback
15 ft
§ 17.04.030 · code text
Table row “Rear”, column “RM-30”: 15 ft.
Maximum density
30 units per net acre
Applies: a project over 15 units per acre needs a conditional use permit; density bonuses not counted
§ 17.04.030 · code text
Table row “RM-30”, column “Max.”: 30 units per net acre [6][9]

Uses in RM-30

Uses the code's use tables allow in RM-30, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, lot size, lot coverage, FAR limit for RM-30 in the zoning tables we read. The code may still set one elsewhere — check the Upland Municipal Code.

Other Upland zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Upland's RM-30 zone?

40 ft (greater height only with a conditional use permit) — Upland Municipal Code § 17.04.030.

What is the minimum front setback in Upland's RM-30 zone?

20 ft — Upland Municipal Code § 17.04.030.

What is the minimum side setback in Upland's RM-30 zone?

5 ft — Upland Municipal Code § 17.04.030.

What is the minimum rear setback in Upland's RM-30 zone?

15 ft — Upland Municipal Code § 17.04.030.

What is the maximum density in Upland's RM-30 zone?

30 units per net acre (a project over 15 units per acre needs a conditional use permit; density bonuses not counted) — Upland Municipal Code § 17.04.030.

General information, not legal advice.

Ask about an Upland property in RM-30

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Upland