Skip to content

Upland · Zoning · RM-10

Upland RM-10 zoning: height, setbacks and lot size

In Upland's RM-10 zone, buildings can be up to 40 ft tall and the front setback is 20 ft (Upland code, read October 2026).

Key points

  • Maximum building height: 40 ft
  • Minimum front setback: 20 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 15 ft
  • Maximum density: 10 units per net acre

RM-10 is a zoning district in Upland. Every value below was read from the Upland Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RM-10

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
40 ft
§ 17.04.030 · code text
Table row “Primary Structure Height (max.)”, column “RM-10”: 40 ft.
Minimum front setback
20 ft
§ 17.04.030 · code text
Table row “Front”, column “RM-10”: 20 ft.
Minimum side setback
5 ft
§ 17.04.030 · code text
Table row “Side”, column “RM-10”: 5 ft.
Minimum rear setback
15 ft
§ 17.04.030 · code text
Table row “Rear”, column “RM-10”: 15 ft.
Maximum density
10 units per net acre
§ 17.04.030 · code text
Table row “RM-10”, column “Max.”: 10 units per net acre [6]

Uses in RM-10

Uses the code's use tables allow in RM-10, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, lot size, lot coverage, FAR limit for RM-10 in the zoning tables we read. The code may still set one elsewhere — check the Upland Municipal Code.

Other Upland zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Upland's RM-10 zone?

40 ft — Upland Municipal Code § 17.04.030.

What is the minimum front setback in Upland's RM-10 zone?

20 ft — Upland Municipal Code § 17.04.030.

What is the minimum side setback in Upland's RM-10 zone?

5 ft — Upland Municipal Code § 17.04.030.

What is the minimum rear setback in Upland's RM-10 zone?

15 ft — Upland Municipal Code § 17.04.030.

What is the maximum density in Upland's RM-10 zone?

10 units per net acre — Upland Municipal Code § 17.04.030.

General information, not legal advice.

Ask about an Upland property in RM-10

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Upland