Victorville · Zoning · CA
Victorville CA zoning: height, setbacks and lot size
In Victorville's CA zone, buildings can be up to 45 ft tall, the front setback is 10 ft and the minimum lot size is 7,500 sq ft (Victorville code, read October 2026).
Key points
- Maximum building height: 45 ft
- Minimum front setback: 10 ft
- Minimum side setback: None required (Interior side and rear yards not next to a residential district)
- Minimum rear setback: None required (Interior side and rear yards not next to a residential district)
- Minimum lot size: 7,500 sq ft
- Maximum lot coverage: 50%
- Maximum floor area ratio (FAR): 2.0
CA is a zoning district in Victorville. Every value below was read from the Victorville Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in CA
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 45 ft See note 4 below the table in the code. § 16-3.10.020 · code textTable row “Maximum Building Height”, column “CA”: 45 (4) Note 4: Unless otherwise approved by the Planning Commission, in accordance with Section 16-3.01.030 of this code. |
|---|---|
| Minimum front setback | 10 ft § 16-3.10.020 · code textTable row “Front Yard Setback”, column “CA”: 10 |
| Minimum side setback | None required Applies: Interior side and rear yards not next to a residential district § 16-3.10.020 · code textTable row “Interior side and rear”, column “CA”: None |
| Minimum rear setback | None required Applies: Interior side and rear yards not next to a residential district § 16-3.10.020 · code textTable row “Interior side and rear”, column “CA”: None |
| Minimum lot size | 7,500 sq ft § 16-3.10.020 · code textTable row “Minimum Net Lot Area”, column “CA”: 7,500 sq ft |
| Maximum lot coverage | 50% § 16-3.10.020 · code textTable row “Maximum Lot Coverage”, column “CA”: 50% |
| Maximum floor area ratio (FAR) | 2.0 See note 1 below the table in the code. § 16-3.10.020 · code textTable row “Maximum Floor Area Ratio”, column “CA”: 2.0 (1) Note 1: FAR of certain multi-floor hospitality uses (e.g. hotels & convention centers) may be increased on a case-by-case basis. |
When a different number applies
The code sets other values for particular lots, buildings or locations in CA:
- Minimum rear setback: 30 ft — Along any rear or side lot line abutting a residential district not separated by a public right-of-way; increased by 30 feet for every story above the ground floor. § 16-3.10.020
Not on this page
We did not find a general stories, density limit for CA in the zoning tables we read. The code may still set one elsewhere — check the Victorville Municipal Code.
Other Victorville zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Victorville's CA zone?
45 ft — Victorville Municipal Code § 16-3.10.020.
What is the minimum front setback in Victorville's CA zone?
10 ft — Victorville Municipal Code § 16-3.10.020.
What is the minimum side setback in Victorville's CA zone?
None required (interior side and rear yards not next to a residential district) — Victorville Municipal Code § 16-3.10.020.
What is the minimum rear setback in Victorville's CA zone?
None required (interior side and rear yards not next to a residential district) — Victorville Municipal Code § 16-3.10.020.
What is the minimum lot size in Victorville's CA zone?
7,500 sq ft — Victorville Municipal Code § 16-3.10.020.
General information, not legal advice.
Ask about a Victorville property in CA
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question