Jurupa Valley · Zoning · M-R-A
Jurupa Valley M-R-A zoning: height, setbacks and lot size
In Jurupa Valley's M-R-A zone, generally buildings can be up to 50 ft tall, the front setback is 50 ft and the minimum lot size is 5 acres, with the conditions listed below (Jurupa Valley code, read October 2026).
Key points
- Maximum building height: 50 ft
- Minimum front setback: 50 ft (Any permitted use except those uses permitted in Section 9.170.020(A))
- Minimum side setback: 50 ft (Any permitted use except those uses permitted in Section 9.170.020(A))
- Minimum rear setback: 50 ft (Any permitted use except those uses permitted in Section 9.170.020(A))
- Minimum lot size: 5 acres (Gross area)
M-R-A (Mineral Resources and Related Manufacturing) is a zoning district in Jurupa Valley. Every value below was read from the Jurupa Valley Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in M-R-A
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 50 ft § 9.170.030 · code textStructure height. No building or structure shall exceed fifty (50) feet in height, unless a greater height is approved pursuant to Section 9.240.370. |
|---|---|
| Minimum front setback | 50 ft Applies: Any permitted use except those uses permitted in Section 9.170.020(A) § 9.170.030 · code textYards. Front, rear, and side, not less than fifty (50) feet for any use permitted except those uses permitted in Section 9.170.020(A); provided further, however, that any structure exceeding fifty (50) feet in height shall have front, side, and rear yard spaces equal to the height of said structure. |
| Minimum side setback | 50 ft Applies: Any permitted use except those uses permitted in Section 9.170.020(A) § 9.170.030 · code textYards. Front, rear, and side, not less than fifty (50) feet for any use permitted except those uses permitted in Section 9.170.020(A); provided further, however, that any structure exceeding fifty (50) feet in height shall have front, side, and rear yard spaces equal to the height of said structure. |
| Minimum rear setback | 50 ft Applies: Any permitted use except those uses permitted in Section 9.170.020(A) § 9.170.030 · code textYards. Front, rear, and side, not less than fifty (50) feet for any use permitted except those uses permitted in Section 9.170.020(A); provided further, however, that any structure exceeding fifty (50) feet in height shall have front, side, and rear yard spaces equal to the height of said structure. |
| Minimum lot size | 5 acres Applies: Gross area § 9.170.030 · code textLot area. Not less than five (5) acres gross. |
When a different number applies
The code sets other values for particular lots, buildings or locations in M-R-A:
- Maximum building height: 75 ft — Building; greater height requires variance pursuant to Section 9.240.270 § 9.170.030
- Maximum building height: 105 ft — Any other structure; greater height requires variance pursuant to Section 9.240.270 § 9.170.030
- Minimum front setback: height of structure — Any structure exceeding 50 feet in height § 9.170.030
- Minimum side setback: height of structure — Any structure exceeding 50 feet in height § 9.170.030
- Minimum rear setback: height of structure — Any structure exceeding 50 feet in height § 9.170.030
Not on this page
We did not find a general stories, lot coverage, FAR, density limit for M-R-A in the zoning tables we read. The code may still set one elsewhere — check the Jurupa Valley Municipal Code.
Other Jurupa Valley zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Jurupa Valley's M-R-A zone?
50 ft — Jurupa Valley Municipal Code § 9.170.030.
What is the minimum front setback in Jurupa Valley's M-R-A zone?
50 ft (any permitted use except those uses permitted in Section 9.170.020(A)) — Jurupa Valley Municipal Code § 9.170.030.
What is the minimum side setback in Jurupa Valley's M-R-A zone?
50 ft (any permitted use except those uses permitted in Section 9.170.020(A)) — Jurupa Valley Municipal Code § 9.170.030.
What is the minimum rear setback in Jurupa Valley's M-R-A zone?
50 ft (any permitted use except those uses permitted in Section 9.170.020(A)) — Jurupa Valley Municipal Code § 9.170.030.
What is the minimum lot size in Jurupa Valley's M-R-A zone?
5 acres (gross area) — Jurupa Valley Municipal Code § 9.170.030.
General information, not legal advice.
Ask about a Jurupa Valley property in M-R-A
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question