Jurupa Valley · Zoning · W-2
Jurupa Valley W-2 zoning: height, setbacks and lot size
In Jurupa Valley's W-2 zone, generally buildings can be up to 50 ft tall, the front setback is 20 ft and the minimum lot size is 20,000 sq ft, with the conditions listed below (Jurupa Valley code, read October 2026).
Key points
- Maximum building height: 50 ft (buildings other than one-family homes)
- Minimum front setback: 20 ft
- Minimum side setback: 10 ft
- Minimum rear setback: 10 ft (20 ft rear yard on through lots)
- Minimum lot size: 20,000 sq ft (minimum average width 100 ft and average depth 150 ft; larger minimums may be set for a particular area or use)
W-2 (Controlled Development Areas) is a zoning district in Jurupa Valley. Every value below was read from the Jurupa Valley Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in W-2
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 50 ft Applies: buildings other than one-family homes § 9.205.030 · code textNo other building or structure shall exceed fifty (50) feet in height, unless a greater height is approved pursuant to Section 9.240.370. |
|---|---|
| Minimum front setback | 20 ft § 9.205.030 · code textFront yard, twenty (20) feet. |
| Minimum side setback | 10 ft § 9.205.030 · code textInterior and street side yard, ten (10) feet. |
| Minimum rear setback | 10 ft Applies: 20 ft rear yard on through lots § 9.205.030 · code textRear yard ten (10) feet, through lots, rear yard twenty (20) feet. |
| Minimum lot size | 20,000 sq ft Applies: minimum average width 100 ft and average depth 150 ft; larger minimums may be set for a particular area or use § 9.205.030 · code textLot size shall not be less than twenty thousand (20,000) square feet, with a minimum average lot width of one hundred (100) feet and a minimum average lot depth of one hundred and fifty (150) feet, unless larger minimum lot area and dimensions are specified for a particular area or use. |
When a different number applies
The code sets other values for particular lots, buildings or locations in W-2:
- Maximum building height: 40 ft — One (1) family residences § 9.205.030
- Maximum building height: 75 ft — absolute limit for any building; a variance may allow more § 9.205.030
- Minimum rear setback: 20 ft — Through lots § 9.205.030
Not on this page
We did not find a general stories, lot coverage, FAR, density limit for W-2 in the zoning tables we read. The code may still set one elsewhere — check the Jurupa Valley Municipal Code.
Other Jurupa Valley zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Jurupa Valley's W-2 zone?
50 ft (buildings other than one-family homes) — Jurupa Valley Municipal Code § 9.205.030.
What is the minimum front setback in Jurupa Valley's W-2 zone?
20 ft — Jurupa Valley Municipal Code § 9.205.030.
What is the minimum side setback in Jurupa Valley's W-2 zone?
10 ft — Jurupa Valley Municipal Code § 9.205.030.
What is the minimum rear setback in Jurupa Valley's W-2 zone?
10 ft (20 ft rear yard on through lots) — Jurupa Valley Municipal Code § 9.205.030.
What is the minimum lot size in Jurupa Valley's W-2 zone?
20,000 sq ft (minimum average width 100 ft and average depth 150 ft; larger minimums may be set for a particular area or use) — Jurupa Valley Municipal Code § 9.205.030.
General information, not legal advice.
Ask about a Jurupa Valley property in W-2
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question