Jurupa Valley · Zoning · R-6
Jurupa Valley R-6 zoning: height, setbacks and lot size
In Jurupa Valley's R-6 zone, generally buildings can be up to 35 ft tall, the front setback is 10 ft and the minimum lot size is 5,000 sq ft, with the conditions listed below (Jurupa Valley code, read October 2026).
Key points
- Maximum building height: 35 ft (one-family residences)
- Minimum front setback: 10 ft (Apartment developments. Additional setbacks may be required by structure height and adjacent land uses.)
- Minimum rear setback: 10 ft (Apartment developments. Additional setbacks may be required by structure height and adjacent land uses.)
- Minimum lot size: 5,000 sq ft (single-family detached developments)
R-6 (Residential Incentive) is a zoning district in Jurupa Valley. Every value below was read from the Jurupa Valley Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in R-6
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft Applies: one-family residences § 9.110.040 · code textOne (1) family residences shall not exceed thirty-five (35) feet in height. |
|---|---|
| Minimum front setback | 10 ft Applies: Apartment developments. Additional setbacks may be required by structure height and adjacent land uses. § 9.110.040 · code textMinimum front and rear yard setbacks shall be ten (10) feet. |
| Minimum rear setback | 10 ft Applies: Apartment developments. Additional setbacks may be required by structure height and adjacent land uses. § 9.110.040 · code textMinimum front and rear yard setbacks shall be ten (10) feet. |
| Minimum lot size | 5,000 sq ft Applies: single-family detached developments § 9.110.040 · code textThe minimum lot area for single-family detached developments shall be five thousand (5,000) square feet. |
When a different number applies
The code sets other values for particular lots, buildings or locations in R-6:
- Maximum building height: 50 ft — all other uses § 9.110.040
Not on this page
We did not find a general stories, side setback, lot coverage, FAR, density limit for R-6 in the zoning tables we read. The code may still set one elsewhere — check the Jurupa Valley Municipal Code.
Other Jurupa Valley zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Jurupa Valley's R-6 zone?
35 ft (one-family residences) — Jurupa Valley Municipal Code § 9.110.040.
What is the minimum front setback in Jurupa Valley's R-6 zone?
10 ft (apartment developments. Additional setbacks may be required by structure height and adjacent land uses) — Jurupa Valley Municipal Code § 9.110.040.
What is the minimum rear setback in Jurupa Valley's R-6 zone?
10 ft (apartment developments. Additional setbacks may be required by structure height and adjacent land uses) — Jurupa Valley Municipal Code § 9.110.040.
What is the minimum lot size in Jurupa Valley's R-6 zone?
5,000 sq ft (single-family detached developments) — Jurupa Valley Municipal Code § 9.110.040.
General information, not legal advice.
Ask about a Jurupa Valley property in R-6
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question